ELECTRIC AIR HEATERS SERIES 4 EG
are intended for occasional or permanent heating of workshops, factories, halls, shops, greenhouses and all other facilities that require clean and fast heating by air circulation.
MOBILE DESIGN
is equipped with stand and cable ( cca 2 m ) for connection.
Heaters 4 EG 5 and 4 EG 9 have standard 3 – phase connector,
while 4EG13 and 4EG18 are delivered without connector.
This type is equipped with thermostat and switch for selective operation
( off, ventilator, 1/2 or 1/3 and 1/1 of electric power ).
WALL – DESIGN
is prepared for fixed mounting on the wall.
This type is equipped with wall stand and room thermostat.
Cables for connection of heaters and room thermostat are not
included in this design, but the manual includes regulations
for type and dimensions of cables.
STANDARD COLOR for both designs is in RAL 7032.
ADDITIONS
– on request :
a) Two or more speed motor
b) For wall design : choice of operation ( only ventilator and power regulations )
c) Cable length
d) Connectors for 4 EG 13 and 4 EG 18 – EURO type
e) Color of heaters
f) Higher or lower temperature of warmed air – higher or lower speed of ventilator
g) Additional air direction control
5) 4 EG SERIES HEATERS are equipped with protecting thermostat,
4EG13 and 4EG18 are equipped with thermostat for exploitation of accumulated energy.
6) SPECIAL CHARACTERISTICS
a) Large number of tubular heaters / kW of power – longer life of tubular heaters
b) Additional protection for high temperature of surfaces
c) Internal air flow directioning
d) Indifferent on voltage inconstancy
e) Compatibility in spare parts
f) Clean heating
g) Parts in heaters from the best world producers
h) Easy mounting
i) More than 30 years of experience in heater producing
